Multisynth-based Architecture

images7

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

Easy Source of Topics for Architecture Essay Writing Tasks

images14

cademic architecture essay writing tasks would usually be performed by university students taking up undergraduate courses in architecture, architectural engineering, building services engineering, architectural technology, building design, other courses related to architecture and building design. The selection of engaging and good topics would be the first that the students would do if they were given the option of choosing their own topics for their architecture essays. If the students are having some difficulties in selecting particular topics for their architecture essays, an easy source where they could find good topics would be the general discussion of the discipline of architecture.

The general discussion of the discipline of architecture is arranged into several main headings with sub-headings under each main heading, and for the most part, each sub-heading would usually have smaller topics that are confined to a specific area of discussion. The student could either select a topic from the main heading or choose the specific areas of discussions that are under each sub-heading that would become the specific topic for his architecture essay.

Under the general discussion of architecture, the main headings and their respective sub-headings are: theory of architecture that includes historic written works on architecture and modern architectural concepts; history of architecture that includes ancient architecture, Asian architecture, Islamic architecture, Medieval architecture, Renaissance architecture, early modern and industrial age architectures, and contemporary architecture. In addition, some of the sub-headings are broken down into smaller areas from which he could select a specific topic.

A student performing regular or constant writing of architecture essays as part of his course requirements should take note that the essay structure of an architecture essay is similar to the basic structure of other academic essays, which consists of sections of the introduction, body and conclusion. Consequently, the student should follow the basic rules or steps in essay structuring that he studied and learned from the other essay writing tasks that he performed from his other academic subjects. The specific content in section of the essay on architecture would naturally be different compared to the specific content of other essays. But the style of writing the content for each section would be the same regardless of the specific subject area under the essay.

The university and college students who would research and write architecture essay should take note that some of the possible topics they would select for their architecture essays could also be applicable and relevant to use for their other academic essay writing tasks. For example, many of those students especially during their first year of studies could perform history essay writing tasks. Therefore, an example of history essays about the architecture related topics could include the architectural history, history of various architectural styles, architectural mythology, and the specific histories of the architectural styles of different civilisations.

Storytelling through Architecture

images17

By Marina Correa Photography: Philippe Ruault; courtesy the architects

The Giraffe Childcare Centre designed by Hondelatte Laporte Architects introduces a dollop of fantasy into the routine lives of suburban Parisian townsfolk-

Niched between a towering structure, next to a neighbourhood built in the 70s and a newly constructed area, it was imperative that the healthcare centre did not -get lost’ within the urban landscape – hence the building is composed of three tiers and each is identified by a unique concrete animal sculpture.

The facades of the building are made out of white corrugated iron that provides a minimal background to the animal sculptures.

Interestingly, each of the south-facing playgrounds is in continuity with the interior spaces; while the urban landscape is animated using a child’s imagination. The wild animal sculptures appropriate a space: a giraffe appears to be peacefully eating the leaves of the trees from the neighbouring park; a polar bear tries to clamber up the steps, while a family of ladybirds climbs the faade in an attempt to reach the interior patio.

Architecture turns into storytelling. The building changes its identity and becomes a landscape in its own right; a metaphor for the urban jungle. The animals and the trees link the building to nature and motion.

Besides infusing a playful and poetic element, this building has also been awarded a green, zero energy efficiency label, making it not just aesthetically appeasing but also one that respects its environment.

Becoming a prominent landmark for the nursery, the affable animal forms transport us to a make-believe world. When pondered upon, definitely a project that goes way beyond the surface to attribute human characteristics and ethos to the emotional, functional routine of a child daycare centre.

to view images click on globalhop.indiaartndesign.com

Struggles and New Approaches to Information Architecture

images5

Information architecture is defined as the outline or blueprint that describes how data and information is systematized, ordered, and controlled. Another definition of information architecture says that it is a system of spotting, managing, and controlling patterns in data. This data-handling technology aims to be able to make complex, ambiguous, and fuzzy sets of information, data, and other resources as simple and as understandable as they can be.

According to a business-related site, it has been unfortunate in these modern times that most business companies struggle in terms of the use of the technology of information architecture. Actually, some businesses are having difficulties even with the most basic applications of information. A significant quantity of companies still experiences difficulties in getting up-to-date, comprehensive, precise, and accurate views of the results of the projects and actions they have done previously. Companies now just create proposals for new, innovative, predictive, and analytical transformation and differentiation in terms of information handling and architecture in a diminishing effort. The result of this failure of the companies to value the technology being delivered by information architecture leads to the struggles they experience that are stated in this article. e.

Companies that are struggling in executing information architecture processes need to adapt a new one that suits their needs the best. In choosing a new style of information architecture, they must bear in mind that in the world of technology, the amount of information and data inputted into the Web is growing in a much rapid way. Also, the speed at which information is received has gone significantly faster than before. Data comes in various types, so an information architecture system must be flexible to such variety of files.

Automation is in demand these days. To learn more about IC693DSM302 and IC693DSM314, check online and be informed about GE Fanuc PLC.

Flexpod Net App – Innovative and Dominant Reference Architecture

images2

The converged infrastructure market finds the flexpod net app very innovative and dominant reference architecture. This data center platform from NetApp and Cisco has found appreciation from users worldwide. Many of these users choose to standardize it for mission-critical applications. This was introduced in the year 2010 and has left many impressed owing to its excellent features. The flex pod netapp scores the brownie points in terms of performance, scalability and availability. They can be found in different packages and are easy to deploy and manage. It won’t be out of context to say, they have created a buzz in the IT world worldwide. The availability of flexpodnetapp is the result of a business collaboration entered between Cisco and NetApp. Their joint efforts have been to enhance capabilities and add broader support to important applications. This is done to ensure the FlexPod is able to meet broadest possible range of IT requirements so that most business-critical applications can be run smoothly. They have been credited for supporting various types of data operating systems and virtualization of databases. Likewise, they have made efforts to address various infrastructure needs in the small and medium-sized entities. These enhancements have given the flexpodnetapp an edge in terms of higher-levels of integration. It has facilitated data centers to interconnect by offering them suitable equipment. This has, in a way, made it easy for entities to either scale up or scale out the performance. They have made storage virtualization simple which in turn has made business data management very easy. It also minimizes total cost of ownership dramatically. The technology used helps in logical demonstration of data as per requirements of virtual storage pools. In a sense, it allows you to focus on critical business applications rather than devote time on complexity of the hardware. The storage virtualization capacities come at various levels of storage hierarchy. This can be seen on all storage platforms. The network provisions are flexible and service providers can regulate flexpodnetapp depending on their needs for a specific period of time. This has given them the edge over other available options. Their biggest contribution has been its ability to provide service to more than 1000 servers. Of course, service providers interested to avail their services need to use Flex Pod in order to optimize their functioning. Flex Pod customers are proud to own one as it enables them to enjoy cloud management solutions. Its phenomenal success has prompted Cisco and NetApp to offer multiple data centre architectural designs. This has been accomplished with help of NetApp Cisco Flex pod project.

Victorian Architecture – Where Culture Meet Elegance

images20

The term Victorian architecture refers to a number of styles of architecture, which was primarily used during the Victorian period. These architectural styles were quite popular during the period of mid 1837 to the beginning of 1901. This period marked the rule of Queen Victoria and was named after her.

The Victorian era of architecture, was marked by a number of styles, such as Renaissance Revival, Neo-Grec, British Arts and Crafts movement, Italianate, Gothic Revival, Jacobethan, Neoclassicism, Industrial architecture, Painted ladies, Queen Anne, Stick-Eastlake, Romanesque Revival, as well as Second Empire.

There have also been Folk as well as Shingle Style Victorian Houses. As it is, the names of the architectural styles, apart from their adaptations had varied between the countries. Several homes merged the elements of various styles and therefore are not easily discernible as one particular style. In the United States, highly decorated houses have often been addressed to as gingerbread houses.

Some of the most prominent Victorian era cities include Richmond, London, Toronto, Boston, St. Louis, Louisville, Saint Paul, Galena, Nelson, Sydney, Melbourne, IL, Galveston, Chicago, Detroit, San Francisco, Glasgow, Kolkata, Mumbai, Pittsburgh, Manchester, Philadelphia, Grand Rapids, as well as New Orleans.

In the United States, the South End of the city of Boston has been recognized as the oldest, as well as the largest Victorian neighborhood of the country. Old Louisville in Kentucky is also believed to be one of the largest Victorian neighborhood of America.

Apart from that, Richmond, Virginia is also home to a number of large Victorian neighborhoods, with the Fan and Church Hill, being the most prominent. Church Hill enjoys the distinction of being a place where Patrick Henry had given his famous speech at the historic Saint John’s church.

The Distillery District of Toronto is home to the largest as well as the best preserved collection of industrial architecture of the Victorian-era in North America. Apart from that, Cabbage town has been the largest as well as the most continuous Victorian style residential area of North America. The other Victorian neighborhoods of Toronto include Annex, Corktown, Park dale, as well as Rosedale.

The Old West End neighborhood in Toledo, Ohio has been recognized as the one having the biggest collection of the late Victorian as well as Edwardian architectural homes of the United States. Carroll Avenue of Los Angeles contains the city’s highest concentration of homes of Victorian style.

There is something really fascinating about the Victorian era and almost everything related to this period, continues to fascinate us to this date, especially Victorian architecture.

Enterprise architecture helps enhance the business strategies

images4

IT industry is the leading sector in the commercial business world. It has many streams to develop the business and to leave the footprints across the globe. They are IT services, hardware implementation, software development, marketing and many more. Software development is the major stream to gain popularity with new innovative technologies and applications. There are numerous platforms and programming languages to develop several software programs and applications to enhance the business. They are Java, HTML, XML, C++, embedded C, Dotnet, visual basics, Siebel, primavera, oracle, SQL and many more. All these platforms are used to design, code and develop multiple applications both for web and desktop purpose.

These days, many organizations are looking for the new innovations to enhance the businesses. Enterprise architecture is the one, which can help organizations enhance the efficiency and flexibility. It helps the business to identify the marketing strategies in several ways to increase the competency and performance. This stream has the ability to translate these marketing insights and needs to common business language of IT strategy to maintain the relationship with the business line executives. It can solve several issues in business to understand the multiple products, platforms, strength and weakness. Generally, it is defined as the process of translating the business strategies into an effective way of enterprise.

These days, many organizations are offering enterprise architecture jobs to enhance their marketing ideas to give an outstanding performance. People, who enter into this field, are designated as enterprise architects. They can assist the organizations to accomplish the business values and to drive the smarter initiatives to improve the performance. Creation, improvement and communication is the key requirement for this architecture that is varied by the principles. It has improved the models with different specifications to describe the evolution. It has a good scope in the IT world with many processes and enterprises to get the benefits.

It has several frameworks such as IAF, EAF, DoDAF and TOGAF. These frameworks are also used to improve the flexibility and growth in the industry. It is the major applications to develop the communication among all kinds of business units to get more industrial needs. In today’s innovative world, many IT companies have implemented this stream to maintain the growth and unit relationship. It is important to manage the several requirements and units in the industry. For that, you have to develop the communication to avoid many hassles. Hence, enterprise architecture is the one to maintain these communication and relationship and improve the performance.

Get more information on: Enterprise Architecture Jobs & IT Service Desk Jobs

Spanish Mission Art Deco Style Architecture

images14

In the architectural world, just as in the worlds of food, clothing, and design, as styles come together we have whats called fusion. In fusion, often disparate elements come together to create a cohesive union, and sometimes seemingly harmonious elements come together in a not so harmonious way. In terms of architecture, a truly interesting blend happened in the beginning of the 20th century, melding together the elements of Spanish Mission revival style with the hip sleekness of Art Deco.

Art Deco buildings are known for their futuristic, sleek, dramatic, geometric flair. Cubes, zigzags, and futuristic chic came together to express the growing machine age in the United States. In the roaring twenties and early thirties, the jazzy Art Deco architecture was sweeping the nation. The Art Deco style found its inspiration from many different sources. The austere shapes and curves were taken from the Bauhaus School and the streamlined modern technology-looking design was melded with images of icons from the Far East, Greece, Rome, Africa, India, and Mayan and Aztec cultures. But above all these, Art Deco took inspiration from an architectural discovery in Egypt.

In 1922, archaeologist Howard Carter and his sponsor, Lord Carnarvon, thrilled the world with their discovery of the tomb of King Tutankhamen. Egypt-chic soon swept the nation and influenced the design of clothes, jewelry, furniture and graphic design. And of course, architecture.

Another style that was popping-up at the same time was the Spanish Mission Revival style, and in California, these two disparate styles found a way to come together in harmony as Hollywood actors were clamoring to get their homes built in the chic Spanish style. California isnt the only place to see the beautiful union of these two styles.
Hawkes Bay has some tremendous Art Deco and Spanish Mission Walks. Hawkes Bay is located in Napier, New Zealand. Following a devastating earthquake in 1931, the whole commercial heart of Napier was destroyed, but the city was about to be reborn in the newest architectural style, and to become the hottest city. In Hawkes Bay, you get to see all the styles right next to each other: Spanish Classic, Spanish mission, and Art Deco, all side by side.

There are also places in the United States that show this great mixture of styles and iconographies. Take for example a lovely Spanish Revival building in St. Louis, by the architect T.P. Barnett, son of George I. Barnett, another famous architect in St. Louis. The T.P. Barnett building is particularly interesting because it also has Art Deco influences, making it one of the most unique buildings in the Grand Center region of St. Louis. Certainly the next time youre in St. Louis, you need to visit this Spanish Revival building on Washington Avenue.

How is 3D printing technology used in Architecture and Medicine

images14

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

Pangnse Advanced Ip Ngn Architecture System Engineer

images4

Cisco Certified Architecture is the highest level of qualifications possible within the Cisco Requirements program. It is the epitome for individuals wanting to show their official approval of Cisco technologies and facilities structure.

This famous qualification recognizes the structural expertise of program Architectures who can support the increasingly complex networks of worldwide organizations and effectively turn organization methods into major technical methods. A Cisco Certified Architecture increases the organization requirements and objectives necessary to produce a strategy for a, large-scale, complex, worldwide program. They can turn organization factors and objectives into functional requirements for a program design. In addition, Cisco Certified Architectures can clearly communicate and recommend suggested Cisco program architectures.
Requirements

There are no official training applications available for the Cisco Qualified Architecture qualifications. However, candidates wanting to accomplish their Cisco Qualified Architecture qualifications must fulfill before an in-person panel made of Cisco-appointed examination panel associates during which the candidate protects their suggested system remedy.

Exam 650-754
Exam 650-754 includes 60 concerns and the time permitted is 60 moments or 1 hour. This test 650-754 is available in only British terminology. Applicants for Exam 650-754 can sign-up for examination at any Pearson VUE middle.

The 650-754 Innovative IP Next-Generation Network (NGN) Structure System Professional (PANGNSE) examinations will determine a learner’s understanding of the Cisco IP NGN architecture and capability to map specialized alternatives to business needs. This examination is a need of the Innovative IP NGN Structure Expertise for Systems Technical engineers.
650-752 Exam Topics

The following subjects are typical recommendations for the articles likely to be involved on the examination. However, other relevant subjects may also appear on any particular distribution of the examination. To be able to better indicate the 650-752 material of the examination and for quality requirements, the recommendations below may modify at any time without observe. They include:

Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
Describe the Cisco IP NGN architecture
Describe Cisco IP NGN conditions and advantages
Describe Cisco IP NGN alternatives and how to arrange them with client needs
Describe typical client objections
Describe the aggressive surroundings and how to place Cisco IP NGN solutions
Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
Describe the company and specialized advantages of the Cisco IP NGN architecture
Describe the company influencers for Cisco IP NGN structure applications
Implement Cisco IP NGN structure scenarios
Jobs of the Cisco Qualified Architecture
Lead growth and advance of architecture
Analyze engineering and industry market trends
Establish with regards to principles for networks
Selection of engineering and products
Identification of company resource needs
Direct the growth of connections and understanding strategy for system architecture

Applicants seeking to use to become a Cisco Qualified Architecture must also keep an actual Cisco Qualified Design (CCDE) certification, confirming their expert level style and company level skills set.